I-3D Print Transparent PLA Filament
| Ibhrendi | Torwell |
| Okubalulekile | I-PLA Ejwayelekile (NatureWorks 4032D / Total-Corbion LX575) |
| Ububanzi | 1.75mm/2.85mm/3.0mm |
| Isisindo sengqikithi | 1 Kg/spool;250 g / spool;500 g / amanzi;3kg/spool;5kg / spool;10kg/spool |
| Isisindo esikhulu | 1.2Kg/spool |
| Ukubekezelelana | ± 0.02mm |
| Indawo Yesitoreji | Yomile futhi ingena umoya |
| Ukomisa Ukusetha | 55˚C ngo-6h |
| Izinto zokusekela | Faka isicelo nge-Torwell HIPS, i-Torwell PVA |
| Ukugunyazwa Kwesitifiketi | CE, MSDS, Reach, FDA, TUV kanye ne-SGS |
| Iyahambisana | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker kanye nanoma yimaphi amanye amaphrinta we-FDM 3D |
| Iphakheji | 1kg / i-spool;8spools/ctn noma 10spools/ctnisikhwama sepulasitiki esivaliwe esinama-desiccants |
Imibala Eminingi
Umbala Uyatholakala:
| Umbala oyisisekelo | Okumhlophe, Okumnyama, Okubomvu, Okuluhlaza okwesibhakabhaka, Okuphuzi, Okuluhlaza, Imvelo, |
| Omunye umbala | Isiliva, Okumpunga, Isikhumba, Igolide, Okubomvana, Okunsomi, Okuwolintshi, Okuphuzi-igolide, Ukhuni, Okuluhlaza Kakhisimusi, I-Galaxy blue, Isibhakabhaka esiluhlaza, Okukhanyelayo |
| Uchungechunge lwe-Fluorescent | I-Fluorescent Red, Okuphuzi Okukhanyayo, Okuluhlaza Okukhanyayo, Okuluhlaza Okuhlaza okwesibhakabhaka |
| Uchungechunge olukhanyayo | Okuluhlaza Okukhanyayo, Okuluhlaza Okwesibhakabhaka Okukhanyayo |
| Uchungechunge olushintsha umbala | Okuluhlaza sasibhakabhaka kuya kokuluhlaza okuphuzi, Okuluhlaza okwesibhakabhaka kuya kokumhlophe, Okunsomi kuya Kopinki, Okumpunga kuya kokumhlophe |
| Yamukela Umbala we-PMS Wekhasimende | |
Imodeli Show
Iphakheji
I-1kg roll Transparent PLA Filament ene-desiccant kuphakheji yokugoma.
I-spool ngayinye ebhokisini ngalinye (Ibhokisi le-Torwell, Ibhokisi eliphakathi nendawo, noma ibhokisi elenziwe ngendlela oyifisayo liyatholakala).
8boxes ibhokisi ngalinye (usayizi webhokisi 44x44x19cm).
Inkampani
FAQ
A: Singabakhiqizi be-3D filament iminyaka engaphezu kwe-10 e-China.
A: INyakatho ye-Amercia, iNingizimu Amercia, iYurophu, i-Afrika, i-Asia njll.
A: Ngokuvamile izinsuku ezingu-3-5 zesampula noma i-oda elincane.izinsuku 7-15 ngemva idiphozi ukuthola oda ngobuningi.Izoqinisekisa isikhathi sokuhola semininingwane uma ufaka i-oda.
A: Ukupakisha okuthekelisa okuphrofeshinali:
1) Ibhokisi lombala we-Torwell
2) Ukupakisha okungathathi hlangothi ngaphandle kolwazi lwenkampani
3) Ibhokisi lakho lomkhiqizo ngokwesicelo sakho.
A:1) Ngesikhathi sokucubungula, isisebenzi somshini osebenzayo sihlola umthamo ngokwaso.
2) Ngemva kokuqeda ukukhiqizwa, izobonisa ku-QA ukuze ihlolwe ngokugcwele.
3)Ngaphambi kokuthunyelwa, i-QA izohlola ngokwezinga lokuhlola isampula le-ISO lokukhiqiza ngobuningi.Izokwenza ukuhlola okugcwele okungu-100% kwe-QTY encane.
A: EX-WORKS, FOB,CIF,C&F,DDP,DDU, njll
| Ukuminyana | 1.24 g/cm3 |
| I-Melt Flow Index(g/10min) | 3.5(190℃/2.16kg） |
| I-Heat Distortion Temp | 53℃, 0.45MPa |
| Amandla Okuqina | 72 MPa |
| Elongation at Break | 11.8% |
| Amandla e-Flexural | 90 MPa |
| I-Flexural Modulus | 1915 MPa |
| IZOD Amandla Omthelela | 5.4kJ/㎡ |
| Ukuqina | 4/10 |
| Ukuphrinta | 9/10 |
| I-Extruder Temperature (℃) | 190-220℃Kunconyiwe 215℃ |
| Izinga lokushisa lombhede(℃) | 25 – 60°C |
| Usayizi weNozzle | ≥0.4mm |
| Isivinini saphephela | Ku-100% |
| Isivinini Sokuphrinta | 40 – 100mm/s |
| Umbhede Oshisayo | Ongakukhetha |
| Indawo Enconyiwe Yokwakha | Ingilazi eneglue, Masking paper, Blue Tape, BuilTak, PEI |
