Intambo ye-PLA empunga engu-1kg spool
| Umkhiqizo | uTorwell |
| Izinto | I-PLA Ejwayelekile (i-NatureWorks 4032D / i-Total-Corbion LX575) |
| Ububanzi | 1.75mm/2.85mm/3.0mm |
| Isisindo sengqikithi | 1 kg/i-spool; 250g/i-spool; 500g/i-spool; 3kg/i-spool; 5kg/i-spool; 10kg/i-spool |
| Isisindo esikhulu | 1.2Kg/i-spool |
| Ukubekezelelana | ± 0.02mm |
| Indawo Yokugcina Izinto | Yomile futhi inomoya |
| Indawo Yokomisa | 55˚C amahora angu-6 |
| Izinto zokusekela | Faka isicelo nge-Torwell HIPS, i-Torwell PVA |
| Ukuvunyelwa Kwesitifiketi | I-CE, i-MSDS, i-Reach, i-FDA, i-TUV kanye ne-SGS |
| Iyahambisana ne | I-Makerbot, i-UP, i-Felix, i-Reprap, i-Ultimaker, i-End3, i-Creality3D, i-Raise3D, i-Prusa i3, i-Zortrax, i-XYZ Printing, i-Omni3D, i-Snapmaker, i-BIQU3D, i-BCN3D, i-MK3, i-AnkerMaker kanye nanoma yimaphi amanye amaphrinta e-FDM 3D |
| Iphakheji | 1kg/i-spool; 8spools/ctn noma 10spools/ctn isikhwama sepulasitiki esivaliwe esine-desiccant |
Umbala Wokukhetha:
Umbala Uyatholakala
Uchungechunge olujwayelekile:Okumhlophe, Okumnyama, Okubomvu, Okuluhlaza okwesibhakabhaka, Okuphuzi, Okuluhlaza okotshani, Imvelo, Isiliva, Okumpunga, Isikhumba, Igolide, Okupinki, Okunsomi, Okuwolintshi, Okuphuzi-igolide, Izinkuni, Okuluhlaza okotshani kukaKhisimusi, Okuluhlaza okwesibhakabhaka kwe-Galaxy, Okuluhlaza okwesibhakabhaka kwesibhakabhaka, Okubonakalayo
Uchungechunge lwe-Florescent:Ubomvu obukhanyayo, Ophuzi obukhanyayo, Oluhlaza Okhanyayo, Oluhlaza Okwesibhakabhaka Okhanyayo
Uchungechunge olukhanyayo:Okuluhlaza okotshani okukhanyayo, Okuluhlaza okwesibhakabhaka okukhanyayo
Uchungechunge lokushintsha umbala:Okuluhlaza okwesibhakabhaka okuluhlaza okotshani kuya kokuphuzi okuluhlaza okotshani, Okuluhlaza okotshani kuya kokumhlophe, Okunsomi kuya kokupinki, Okumpunga kuya kokumhlophe
Umbala owenziwe ngokwezifiso uyatholakala. Ungasazisa nje ikhodi ye-RAL noma ye-Pantone.
Phrinta Imodeli Umbukiso
Imininingwane Yephakheji
Intambo ye-PLA engu-1kg ene-desiccant ephaketheni le-vaccum.
Ibhokisi ngalinye lifakwe ebhokisini ngalinye (ibhokisi likaTorwell, ibhokisi elingathathi hlangothi, noma ibhokisi elenziwe ngokwezifiso elitholakalayo).
Amabhokisi angu-8 ngebhokisi ngalinye (usayizi webhokisi ngu-44x44x19cm).
UTorwell uneminyaka engaphezu kwengu-10 enolwazi lwe-3D filament R&D, futhi ukhiqiza zonke izinhlobo ze-filament, okuhlanganisa i-PLA, i-PLA+, i-PETG, i-ABS, i-TPU, i-Wood PLA, i-Silk PLA, i-Marble PLA, i-ASA, i-Carbon Fiber, i-Nylon, i-PVA, i-Metal, i-Cleaning filament njll. I-3D filament ngobukhulu enekhwalithi ephezulu, efaka isandla ekwenzeni umkhiqizo ube ngcono futhi uthembeke kuzo zonke iziphrinta ze-1.75mm FDM 3D ezivamile.
Amathiphu Okuphrinta i-PLA filament
Ukuze sikusize nge-filament ye-PLA yokunyathelisa ye-3D, sinikeza amathiphu ethu ama-5 okusebenzisa amanye amathiphu okuphrinta nge-filament ye-PLA:
1. Izinga lokushisa
Uma uphrinta nge-PLA filament, welulekwa ukuthi uqale ngokushisa kokuqala okungu-195 °C, kuzoqinisekisa ukuthi uzinika ithuba elihle kakhulu lokuphumelela. Izinga lokushisa lingancishiswa noma landiswe ngama-degree angu-5 ukuze uthole ikhwalithi efanele yokuphrinta namandla ukuze kuhambisane. Ukuze uthuthukise ukunamathela epuletini lokwakha, kungcono ukufudumeza umbhede wokuphrinta kuma-degree angu-60.
2. Izinga lokushisa liphezulu kakhulu
Uma izinga lokushisa liphezulu kakhulu, izintambo zizovela. I-extruder izovuza izinto ze-PLA uma ihamba phakathi kwezindawo ezahlukene ngesikhathi sokuphrinta. Uma lokhu kwenzeka, kuzodingeka wehlise izinga lokushisa. Yenza lokhu ngokunyuka kwama-degrees angu-5 ngesinyathelo, kuze kube yilapho i-extruder iyeka ukuvuza izinto eziningi kangaka.
3. Izinga lokushisa liphansi kakhulu
Uma izinga lokushisa lokuphrinta libanda kakhulu, uzothola ukuthi intambo izohluleka ukunamathela kungqimba lwangaphambilini. Izodala indawo ebukeka futhi izwakale ilukhuni. Okwamanje, ingxenye izoba buthakathaka bese ingadonswa kalula. Uma lokhu kwenzeka, izinga lokushisa lekhanda lokuphrinta kufanele lenyuswe ngamadigri angu-5 kuze kube yilapho ukuphrinta kubukeka kahle futhi izingxenye zomugqa zengqimba ngayinye zilungile. Ngenxa yalokho ingxenye izoba namandla uma umsebenzi usuqediwe.
4. Gcina intambo ye-PLA yomile
Izinto ze-PLA zidinga ukugcinwa endaweni epholile nemnyama, okungcono kube esikhwameni esivaliwe, esingakusiza ukuthi ulondoloze ikhwalithi yamapulasitiki e-PLA. Kuzoqinisekisa ukuthi umphumela wenqubo yokuphrinta unjengoba kulindelekile.
| Ubuningi | 1.24 g/cm3 |
| Inkomba Yokugeleza Kokuncibilika (g/10min) | 3.5(I-1965)190℃/2.16kg） |
| Izinga lokushisa lokushintshashintsha kokushisa | 53℃, 0.45MPa |
| Amandla Okudonsa | 72 MPa |
| Ukwelula Ngesikhathi Sokuphumula | 11.8% |
| Amandla Okugobeka | 90 MPa |
| I-Flexural Modulus | 1915 MPa |
| Amandla Omthelela we-IZOD | 5.4kJ/㎡ |
| Ukuqina | 4/10 |
| Ukuphrinta | 9/10 |
| Izinga Lokushisa Lomkhiphi (℃) | 190 – 220℃ |
| Izinga lokushisa lombhede (℃) | 25 – 60°C |
| Usayizi We-Nozzle | ≥0.4mm |
| Isivinini saphephela | Ku-100% |
| Isivinini Sokuphrinta | 40 – 100mm/s |
| Umbhede Ofudumele | Ongakukhetha |
| Izindawo Zokwakha Ezinconyiwe | Ingilazi eneglue, iphepha lokumboza, i-Blue Tape, i-BuilTak, i-PEI |
