Intambo ye-Silk PLA 3D Intambo ye-Silk ekhazimulayo ye-3D
Izici Zomkhiqizo
| Umkhiqizo | uTorwell |
| Izinto | izinhlanganisela ze-polymer i-Pearlescent PLA (NatureWorks 4032D) |
| Ububanzi | 1.75mm/2.85mm/3.0mm |
| Isisindo sengqikithi | 1 kg/i-spool; 250g/i-spool; 500g/i-spool; 3kg/i-spool; 5kg/i-spool; 10kg/i-spool |
| Isisindo esikhulu | 1.2Kg/i-spool |
| Ukubekezelelana | ± 0.03mm |
| Ubude | 1.75mm(1kg) = 325m |
| Indawo Yokugcina Izinto | Yomile futhi inomoya |
| Indawo Yokomisa | 55˚C amahora angu-6 |
| Izinto zokusekela | Faka isicelo nge-Torwell HIPS, i-Torwell PVA |
| Ukuvunyelwa Kwesitifiketi | I-CE, i-MSDS, i-Reach, i-FDA, i-TUV kanye ne-SGS |
| Iyahambisana ne | I-Makerbot, i-UP, i-Felix, i-Reprap, i-Ultimaker, i-End3, i-Creality3D, i-Raise3D, i-Prusa i3, i-Zortrax, i-XYZ Printing, i-Omni3D, i-Snapmaker, i-BIQU3D, i-BCN3D, i-MK3, i-AnkerMaker kanye nanoma yimaphi amanye amaphrinta e-FDM 3D |
| Iphakheji | 1kg/i-spool; 8spools/ctn noma 10spools/ctnisikhwama sepulasitiki esivaliwe esine-desiccant |
Imibala Eminingi
Umbala Otholakalayo:
| Umbala oyisisekelo | Okumhlophe, Okumnyama, Okubomvu, Okuluhlaza okwesibhakabhaka, Okuphuzi, Okuluhlaza okotshani, Isiliva, Okumpunga, Igolide, Okuwolintshi, Okupinki |
| Yamukela Umbala we-PMS wekhasimende | |
Umbukiso Wemodeli
Iphakheji
I-roll engu-1kg Intambo yesilika ene-desiccant ephaketheni le-vaccum.
Ibhokisi ngalinye lifakwe ebhokisini ngalinye (ibhokisi likaTorwell, ibhokisi elingathathi hlangothi, noma ibhokisi elenziwe ngokwezifiso elitholakalayo).
Amabhokisi angu-8 ngebhokisi ngalinye (usayizi webhokisi ngu-44x44x19cm).
Kungani uthenga kuTorwell?
Izinzuzo zethu:
1) Akukho bhamuza, ikhwalithi enhle yokusekela umphumela wokuphrinta ophelele.
2) Intengo ethengiswa ngobuningi evela efektri, isekela umsebenzi we-OEM.
3) Ukukhetha imibala okwengeziwe, kufinyelela imibala efinyelela ku-30, nombala owenziwe ngokwezifiso uyatholakala.
4) Izinsizakalo ezingcono ngaphambi kwenkonzo kanye nangemva kwayo
• Kungakhathaliseki ukuthi i-oda lakho lingakanani, sinikeza isevisi efanayo
• Uma usuba ngumlingani wethu, sizokusekela ukukhangisa kwakho, okuhlanganisa nezithombe zomkhiqizo
• Yonke imikhiqizo izohlolwa kabusha ngaphambi kokuthunyelwa. Onjiniyela bezobuchwepheshe bazoba ku-inthanethi ukuze basekele uma kudingeka.
• Sikhula ndawonye namakhasimende ethu wonke.
5) Ukulethwa okusheshayo, isampula noma i-oda elincane zingakapheli izinsuku ezingu-1-2, i-oda elikhulu noma le-OEM izinsuku ezingu-5-7.
Offer free sample for testing. Just email us info@torwell3d.com. Or Skype alyssia.zheng.
Sizokuphendula zingakapheli amahora angama-24.
| Ubuningi | 1.21 g/cm3 |
| Inkomba Yokugeleza Kokuncibilika (g/10min) | 4.7（190℃/2.16kg） |
| Izinga lokushisa lokushintshashintsha kokushisa | 52℃, 0.45MPa |
| Amandla Okudonsa | 72 MPa |
| Ukwelula Ngesikhathi Sokuphumula | 14.5% |
| Amandla Okugobeka | 65 MPa |
| I-Flexural Modulus | 1520 MPa |
| Amandla Omthelela we-IZOD | 5.8kJ/㎡ |
| Ukuqina | 4/10 |
| Ukuphrinta | 9/10 |
| Izinga Lokushisa Lomkhiphi (℃) | 190 – 230℃Kunconywa ama-215℃ |
| Izinga lokushisa lombhede (℃) | 45 – 65°C |
| Usayizi We-Nozzle | ≥0.4mm |
| Isivinini saphephela | Ku-100% |
| Isivinini Sokuphrinta | 40 – 100mm/s |
| Umbhede Ofudumele | Ongakukhetha |
| Izindawo Zokwakha Ezinconyiwe | Ingilazi eneglue, iphepha lokumboza, i-Blue Tape, i-BuilTak, i-PEI |
