Intambo ye-Silk PLA 3D Enobuso Obukhazimulayo, 1.75mm 1KG/Spool
Izici Zomkhiqizo
Isici esiyingqayizivele se-filament yokunyathelisa ye-Torwell silk PLA ukubukeka kwayo okubushelelezi nokucwebezelayo, okufana nokuthungwa kwe-silika. Le filament inenhlanganisela eyingqayizivele ye-PLA nezinye izinto ezinikeza isiphetho esicwebezelayo entweni ephrintiwe. Ngaphezu kwalokho, i-filament ye-silk PLA inezakhiwo ezinhle kakhulu zemishini, okuhlanganisa amandla aphezulu okunamathela, ukuguquguquka okuhle, kanye nokunamathela okuhle kakhulu kwezingqimba, okuqinisekisa ukuqina nokuphila isikhathi eside kwezinto eziphrintiwe.
| Umkhiqizo | Ti-orwell |
| Izinto | izinhlanganisela ze-polymer i-Pearlescent PLA (NatureWorks 4032D)) |
| Ububanzi | 1.75mm/2.85mm/3.0mm |
| Isisindo sengqikithi | 1 kg/i-spool; 250g/i-spool; 500g/i-spool; 3kg/i-spool; 5kg/i-spool; 10kg/i-spool |
| Isisindo esikhulu | 1.2Kg/i-spool |
| Ukubekezelelana | ± 0.03mm |
| Ubude | 1.75mm(1kg) = 325m |
| Indawo Yokugcina Izinto | Yomile futhi inomoya |
| Indawo Yokomisa | 55˚C amahora angu-6 |
| Izinto zokusekela | Faka isicelo nge-Torwell HIPS, i-Torwell PVA |
| Ukuvunyelwa Kwesitifiketi | I-CE, i-MSDS, i-Reach, i-FDA, i-TUV kanye ne-SGS |
| Iyahambisana ne | I-Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, Bambu Lab X1, AnkerMaker kanye nanoma yimaphi amanye amaphrinta e-FDM 3D |
Imibala Eminingi
Umbala uyatholakala:
| Umbala oyisisekelo | Okumhlophe, Okumnyama, Okubomvu, Okuluhlaza okwesibhakabhaka, Okuphuzi, Okuluhlaza okotshani, Isiliva, Okumpunga, Igolide, Okuwolintshi, Okupinki |
| Yamukela Umbala we-PMS wekhasimende | |
Kukhiqizwe Ngokwesistimu Yombala Ejwayelekile:
Yonke imicu enemibala esiyikhiqizayo yakhiwe ngokwesistimu yombala ejwayelekile njenge-Pantone Color Matching System. Lokhu kubalulekile ukuqinisekisa umbala ohambisanayo neqoqo ngalinye kanye nokusivumela ukuthi sikhiqize imibala ekhethekile njengemibala yensimbi kanye nemibala eyenziwe ngokwezifiso.
Umbukiso Wemodeli
Iphakheji
Imininingwane yokupakisha:
I-roll engu-1kg Intambo yesilika ene-desiccant ephaketheni lama-vacuum.
Ibhokisi ngalinye lifakwe ebhokisini ngalinye (ibhokisi likaTorwell, ibhokisi elingathathi hlangothi, noma ibhokisi elenziwe ngokwezifiso liyatholakala).
Amabhokisi angu-8 ngebhokisi ngalinye (usayizi webhokisi ngu-44x44x19cm).
Ukugcinwa kahle kwefilamenti yesilika ye-PLA kubalulekile ekugcineni izakhiwo zayo kanye nekhwalithi yayo. Kunconywa ukugcina ifilamenti endaweni epholile, eyomile kude nokukhanya kwelanga okuqondile kanye nomswakama. Ukuchayeka emswakama kungabangela ukuthi impahla yonakale futhi kuthinte ikhwalithi yokunyathelisa kwayo. Ngakho-ke, kuyacetyiswa ukuthi igcine impahla esitsheni esivaliwe esinamaphakethe e-desiccant ukuvimbela ukumuncwa komswakama.
Izitifiketi:
I-ROHS; I-REACH; I-SGS; I-MSDS; I-TUV
| Ubuningi | 1.21 g/cm3 |
| Inkomba Yokugeleza Kokuncibilika (g/10min) | 4.7(I-1965)190℃/2.16kg） |
| Izinga lokushisa lokushintshashintsha kokushisa | 52℃, 0.45MPa |
| Amandla Okudonsa | 72 MPa |
| Ukwelula Ngesikhathi Sokuphumula | 14.5% |
| Amandla Okugobeka | 65 MPa |
| I-Flexural Modulus | 1520 MPa |
| Amandla Omthelela we-IZOD | 5.8kJ/㎡ |
| Ukuqina | 4/10 |
| Ukuphrinta | 9/10 |
WUngakhetha kanjani i-Torwell Silk PLA 3D filament?
1. I-filament yesilika i-Torwell PLA itholakala ekubukekeni kwayo okuhle kakhulu. Uma kuqhathaniswa nezinto zendabuko ze-PLA, i-filament yesilika i-PLA inendawo ebushelelezi, okuholela ekubukekeni okubushelelezi kakhulu kumodeli ephrintiwe. Ngaphezu kwalokho, i-filament yesilika i-PLA inemibala ehlukahlukene ongakhetha kuyo ukuze uyiphrinte.
2.Isici se-Torwell Silk PLA filament yizakhiwo zayo eziqinile zemishini. Ayigcini nje ngokuba namandla amahle kakhulu okubamba nokugoba, kodwa futhi isebenza kahle ekugobeni nasekusonteni. Lokhu kwenza i-silk PLA filament ifaneleke kakhulu ekuphrinteni ezinye izinto ezidinga ukusebenza okuphezulu kwemishini, njengokuklama kwezimboni, izingxenye zemishini, njalo njalo.
3.I-filament ye-Torwell Silk PLA nayo inokumelana okuhle kakhulu nokushisa kanye nokuqina kwamakhemikhali. Izinga lokushisa layo lokuguquguquka kokushisa lifinyelela ku-55°C, elingasebenza ezindaweni ezinokushisa okuphezulu, futhi limelana kahle ne-UV kanye nokugqwala kwamakhemikhali.
4.Inzuzo ye-filament ye-Torwell Silk PLA ukuthi kulula ukuphrinta nokucubungula. Uma kuqhathaniswa nezinye izinto, i-filament ye-Torwell Silk PLA inokugeleza okuhle nokunamathela, okwenza kube lula kakhulu ukuyicubungula. Ngesikhathi senqubo yokuphrinta, ngeke kube nezinkinga zokuvaleka noma ukuwa. Ngesikhathi esifanayo, i-filament ye-silk PLA ingaphrintwa kusetshenziswa amaphrinta amaningi e-FDM 3D, okwenza isetshenziswe kabanzi ezinhlelweni ezahlukene zokuphrinta ze-3D.
| Izinga Lokushisa Lomkhiphi (℃) | 190 – 230℃Kunconywe abangu-215℃ |
| Izinga lokushisa lombhede (℃) | 45 – 65°C |
| NoUsayizi we-zzle | ≥0.4mm |
| Isivinini saphephela | Ku-100% |
| Isivinini Sokuphrinta | 40 – 100mm/s |
| Umbhede Ofudumele | Ongakukhetha |
| Izindawo Zokwakha Ezinconyiwe | Ingilazi eneglue, iphepha lokumboza, i-Blue Tape, i-BuilTak, i-PEI |
Ngicela uqaphele:
Izilungiselelo zokuphrinta ze-Silk PLA Filament zifana neze-PLA yendabuko. Izinga lokushisa lokuphrinta elinconywayo liphakathi kuka-190-230°C, kanti izinga lokushisa lombhede liphakathi kuka-45-65°C. Isivinini sokuphrinta esifanele singu-40-80 mm/s, kanti ukuphakama kwesendlalelo kufanele kube phakathi kuka-0.1-0.2mm. Kodwa-ke, kubalulekile ukuqaphela ukuthi lezi zilungiselelo zingahluka kuye ngokuthi iphrinta ethile ye-3D isetshenziswa, futhi kunconywa ukulungisa izilungiselelo ngokwezincomo zomenzi.
Ukuze uthole imiphumela emihle kakhulu nge-filament yokunyathelisa yesilika i-PLA, kunconywa ukusebenzisa i-nozzle enobubanzi obungu-0.4 mm noma ngaphansi. Ububanzi be-nozzle obuncane buyasiza ekufinyeleleni imininingwane emincane kanye nekhwalithi engcono yobuso. Ngaphezu kwalokho, kunconywa ukusebenzisa ifeni yokupholisa ngesikhathi senqubo yokunyathelisa ukuvimbela ukugoba nokuthuthukisa ikhwalithi yokunyathelisa iyonke.
