Ipeni le-3D le-Torwell PLA Intambo yephrinta ye-3D kanye nepeni le-3D

Incazelo:

✅ Ukubekezelelana kwe-+/- 0.03mm PLA Filament Refills okungu-1.75mm kusebenza kahle nayo yonke i-3D Pen kanye ne-FDM 3D Printer, izinga lokushisa lokuphrinta lingu-190°C – 220°C.

✅ Izinyawo Eziqondile Ezingu-400, Imibala Egqamile Engu-20 Ibhonasi Emibili Ekhanyayo Emnyama yenza umdwebo wakho we-3D, ukuphrinta, kanye nokudweba izithombe kube kuhle kakhulu.

✅ Ama-Spatula amabili wamahhala akusiza ukuthi uqede futhi ususe amaphrinta akho nemidwebo kalula nangokuphepha.

✅ Amabhokisi Anombala Omncane angavikela i-3D Filament engonakali, Ibhokisi elinesibambo lilula kakhulu ukulithatha.

Umbala:Imibala engu-20

Usayizi:1.75mm/2.85mm/3.0mm

Isisindo sengqikithi:1kg/isipuni

Sithumelele i-imeyili

Imininingwane

Amathegi Omkhiqizo

Izici Zomkhiqizo Ukucaciswa

Izinkomba Zokugcwaliswa Kwentambo Yepeni Le-Torwell 3D
Ububanzi	1.75MM 0.03MM
Izinga Lokushisa Lokuphrinta	190-220°C / 374-428°F
Umbala	Imibala ethandwayo engu-18 + imibala emibili ekhazimulayo emnyama
Okubalulekile	Khulula ekukhanyeni noma elangeni amahora ambalwa ukuze umunce ukukhanya. Ibhamuza: Amabhamuza ayi-100% angenalutho
Ubude	Ingqikithi 400Fire ; 200fire (amamitha ayi-6) ngekhoyili ngayinye
Iphakheji	Ibhokisi Elinemibala Elinentambo Yamakhoyili angu-20 + Ama-Spatula amabili

Kungani Ukhethe iTorwell

♥ +/-0.03MM UKUBEKEZELELA:uTorwellIzintambo zephrinta ye-PLA 3D zikhiqizwa ngemininingwane eqondile futhi zinokubekezelela okungu-+/- 0.03mm kuphela.

♥ Intambo ye-PLA engu-1.75MM:Ama-filament e-PLA asetshenziswa ezinhlobonhlobo zezinhlelo zokusebenza zokuphrinta ezinephunga eliphansi kanye ne-Low-Warp. Uma kuqhathaniswa ne-PLA yendabuko ethambile,uTorwellIzintambo zephrinta ye-3D zilungise ukubola kwezinto ukuze zisebenze kahle kakhulu.

♥ 100% OKUNOBUNGANI NGOKULONDOLOZA: uTorwellIzintambo zephrinta ze-3D zihambisana nesiqondiso se-Restriction of Hazardous Substance (RoHS) futhi azinazo izinto ezingaba yingozi. Intambo ye-PLA engu-1.75mm ikhipha iphunga elimnandi, futhi abaningi bayibheka njengentuthuko kunepulasitiki eshisayo.

♥ UKUPHAKISHA OKUVALIWE OKUVALIWE:Ezinye izinto zokuphrinta ze-3D zingathinteka kabi umswakama, ngakho-ke yingakhouTorwellIzintambo zepeni ze-3D zonke zivaliwe nge-vacuum kanye nephakethe le-desiccant. Lokhu kuzokusiza ukuthi ugcine kalula izintambo zakho zepeni ze-3D zisesimweni esihle sokugcina futhi zingenalo uthuli noma ukungcola ngaphambi kokuvula iphakheji evaliwe nge-vacuum.

♥ Ihambisana Kakhulu Nepeni Lakho Le-3D:Iyahambisana nawo wonke amaphrinta e-FDM 3D kanye ne-3D Pen.