I-Torwell PLA Carbon Fiber 3D Printer Filament, 1.75mm 0.8kg/spool, Matte Black
Izici Zomkhiqizo
Izinhlayiya ze-Carbon filaments ziyizinto eziyinhlanganisela ezakhiwe ngokufaka izingcezwana ze-carbon fiber kusisekelo se-polymer, efana nemicu efakwe ngensimbi kodwa enemicu emincane kunalokho.Isisekelo se-polymer singaba sezinto ezihlukene zokuphrinta ze-3D, njenge-PLA, i-ABS, i-PETG noma inayiloni, phakathi kwabanye.
Amandla angeziwe nokuqina, Ukuzinza okuhle kwe-dimensional, Isiphetho esihle sendawo yonke.Isisindo esilula esenza le 3d filament ibe yisinqumo esihle kubakhi be-drone kanye nabathandi be-RC hobbyists.
| Birandi | Tnoma kahle |
| Okubalulekile | I-20% High-Modulus Carbon Fibers ehlanganiswe nayo80%I-PLA (NatureWorks 4032D) |
| Ububanzi | 1.75mm/2.85mm/3.0mm |
| Isisindo sengqikithi | 800g / isitsha;250 g / spool;500 g / amanzi;1kg / i-spool; |
| Isisindo esikhulu | 1.0Kg/spool |
| Ukubekezelelana | ± 0.03mm |
| Length | 1.75mm(800g) =260m |
| Indawo Yesitoreji | Yomile futhi ingena umoya |
| Ukomisa Ukusetha | 55˚C ngo-6h |
| Izinto zokusekela | Faka isicelo ngeTorwell HIPS, Torwell PVA |
| Ukugunyazwa Kwesitifiketi | CE, MSDS, Reach, FDA, TUV kanye ne-SGS |
| Iyahambisana | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker kanye nanoma yimaphi amanye amaphrinta we-FDM 3D |
| Iphakheji | 1kg / i-spool;8spools/ctn noma 10spools/ctnisikhwama sepulasitiki esivaliwe esinama-desiccants |
Imibala Eminingi
Iphakheji
Factory Facility
I-Torwell, umkhiqizi omuhle kakhulu onolwazi olungaphezu kweminyaka eyi-10 ku-3D printing filament.
Kungani i-PLA Carbon Fiber filament?
I-Torwell PLA-CF iyikhabhoni PLA 1.75mm enamandla aphezulu kanye nokuqina okuphezulu ngenkathi ibonisa ukuqina okuhle.I-PLA carbon fibre 3D printer filament iphinde ibe ne-satin emangalisayo nesiphetho se-matte okwenza ukuphrinta kubukeke kushelela kakhulu.
I-Carbon Fiber (equkethe u-20% we-carbon fiber, ngesisindo) ihlanganiswe ne-PLA ukuze kwakhiwe ipulasitiki eqinile elungele ukuphrinta izinto ezidinga amandla engeziwe, abrasive ngaphezu kwe-PLA evamile.
Inothi elibalulekile
A. I-Carbon Fiber ishwabene kune-PLA evamile efomini layo le-filament, ngakho-ke ama-pls awayigobi futhi ayiphathe ngokucophelela ukuze inqande ukuphuka.
B. Sincoma ukuthi usebenzise umlomo wombhobho ongu-0.5mm noma omkhulu ukuze ugweme ukuvaleka ngokweqile.
C. Sicela ufake i-nozzle ekwazi ukumelana ne-abrasive kuphrinta yakho ngaphambi kokuphrinta nge-Torwell PLA-CF efana nombhobho wensimbi engagqwali.Njengoba i-carbon filament ye-PLA filament izwela kakhulu kumswakama, sicela uqiniseke ukuthi awuwusebenzisi endaweni enomswakama ophezulu futhi uwubuyisele kokubi okungase kuvaleleke ngemva kokuwusebenzisa.
FAQ
A: I-torwell carbon fiber ngokuvamile yenziwe nge-carbon fiber eqoshiwe.
A: 1-3mm
A: I-torwell carbon fibers iyimoduli ephakathi.
A: I-Torwell pla filament inokuqukethwe kwe-carbon fiber cishe okungama-20%.
| Ukuminyana | 1.32 g/cm3 |
| I-Melt Flow Index(g/10min) | 5.5(190℃/2.16kg） |
| I-Heat Distortion Temp | 58℃, 0.45MPa |
| Amandla Okuqina | 70 MPa |
| Elongation at Break | 32% |
| Amandla e-Flexural | 45I-MPa |
| I-Flexural Modulus | 2250I-MPa |
| IZOD Amandla Omthelela | 30kJ/㎡ |
| Ukuqina | 6/10 |
| Ukuphrinta | 9/10 |
| I-Extruder Temperature (℃) | 190-230℃Kunconyiwe 215℃ |
| Izinga lokushisa lombhede(℃) | 25 – 60°C |
| Nozzle Usayizi | ≥0.5mmKungcono ukusebenzisa i-Hardened Steel Nozzles. |
| Isivinini saphephela | Ku-100% |
| Isivinini Sokuphrinta | 40 -80mm/s |
| Umbhede Oshisayo | Ongakukhetha |
| Indawo Enconyiwe Yokwakha | Ingilazi eneglue, Masking paper, Blue Tape, BuilTak, PEI |
