I-PETG 3D Printer Filament 1.75mm/2.85mm, 1kg
I-PETG iyinto enhle kakhulu yokuphrinta ye-3D elungele izinhlelo zokusebenza ezahlukahlukene.Inamandla aphezulu, ukumelana namakhemikhali, ukucaca, nokumelana ne-UV, futhi iyisinqumo esimeme sezinto zokuphrinta ze-3D.
Izici Zomkhiqizo
| Birandi | Tnoma kahle |
| Okubalulekile | I-SkyGreen K2012/PN200 |
| Ububanzi | 1.75mm/2.85mm/3.0mm |
| Isisindo sengqikithi | 1 Kg/spool;250 g / spool;500 g / amanzi;3kg/spool;5kg / spool;10kg/spool |
| Isisindo esikhulu | 1.2Kg/spool |
| Ukubekezelelana | ± 0.02mm |
| Length | 1.75mm(1kg) = 325m |
| Indawo Yesitoreji | Yomile futhi ingena umoya |
| Dukukhala Isilungiselelo | 65˚C ngo-6h |
| Izinto zokusekela | Faka isicelo ngeTorwell HIPS, Torwell PVA |
| CUkugunyazwa kokukhishwa | CE, MSDS, Reach, FDA, TUV, SGS |
| Iyahambisana | I-Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, Bambu Lab X1, AnkerMaker kanye nanoma yimaphi amanye amaphrinta e-FDM 3D |
Imibala Eminingi
Umbala uyatholakala:
| Umbala oyisisekelo | Okumhlophe, Okumnyama, Okubomvu, Okuluhlaza okwesibhakabhaka, Okuphuzi, Okuhlaza, Okumpunga, Okulisiliva, Okuwolintshi, Okusobala |
| Omunye umbala | Umbala owenziwe ngendlela oyifisayo uyatholakala |
Yonke imicu enemibala esiyikhiqizayo yenziwa ngokuvumelana nesistimu yombala evamile njenge-Pantone Color Matching System.Lokhu kubalulekile ukuze kuqinisekiswe umthunzi wombala ongaguquki nayo yonke inqwaba kanye nokusivumela ukuthi sikhiqize imibala ekhethekile efana nemibala ye-Multicolor kanye nemibala Engokwezifiso.
Isithombe esibonisiwe siwumfanekiso wento, umbala ungahluka kancane ngenxa yokumiswa kombala kweqapha ngalinye.Sicela uhlole kabili usayizi nombala ngaphambi kokuthenga.
Imodeli Show
Iphakheji
I-1kg roll PETG filament ene-desiccant kuphakheji ye-vacuum
I-spool ngayinye ebhokisini ngalinye (ibhokisi le-Torwell, ibhokisi eliphakathi nendawo, noma ibhokisi elenziwe ngezifiso liyatholakala)
8boxes ibhokisi ngalinye (usayizi webhokisi 44x44x19cm)
I-spool ngayinye ye-TORWELL PETG Filament ithunyelwa esikhwameni sepulasitiki esivalekayo, futhi itholakala ngefomethi engu-1.75mm kanye ne-2.85mm engathengwa njenge-0.5kg, 1kg, noma 2kg spools, ngisho no-5kg noma 10kg spool etholakalayo uma ikhasimende lidinga.
Indlela Yokugcina:
1. Uma uzoshiya iphrinta yakho ingasebenzi isikhathi esingaphezu kwezinsuku ezimbalwa, sicela uhoxise umcu ukuze uvikele umlomo wephrinta yakho.
2. Ukuze unwebe ukuphila komcu wakho, sicela ubeke umcu ongavali emuva esikhwameni se-vacuum sangempela bese usibeka endaweni epholile neyomile ngemva kokuphrinta.
3. Lapho ugcina umucu wakho, sicela uphakele indawo evulekile ngezimbobo ezisonqenqemeni lwe-filament reel ukugwema ukusonteka, ukuze yondle kahle uma uyisebenzisa ngokuzayo.
Izitifiketi:
I-ROHS;FINYELELA;SGS;I-MSDS;I-TUV
| Ukuminyana | 1.27 g/cm3 |
| I-Melt Flow Index(g/10min) | 20(250℃/2.16kg） |
| I-Heat Distortion Temp | 65℃, 0.45MPa |
| Amandla Okuqina | 53 MPa |
| Elongation at Break | 83% |
| Amandla e-Flexural | 59.3MPa |
| I-Flexural Modulus | 1075 MPa |
| IZOD Amandla Omthelela | 4.7kJ/㎡ |
| Ukuqina | 8/10 |
| Ukuphrinta | 9/10 |
Qhathanisa nezinye izinto ezijwayelekile zokuphrinta ze-3D ezifana ne-PLA ne-ABS, i-Torwell PETG Filament ihlala isikhathi eside.Amandla e-PETG ayenza ifanelekele izinhlelo zokusebenza eziningi, okuhlanganisa izingxenye ezisebenzayo zokukhiqiza kanye nezindlu ezidinga amandla aphezulu.
I-Torwell PETG filament nayo imelana kakhulu nokugqwala kwamakhemikhali kune-PLA ne-ABS, okwenza ifaneleke ukukhiqiza izingxenye ezidinga ukumelana namakhemikhali, njengezinsimbi zamakhemikhali namathangi okugcina.
I-Torwell PETG Filament nayo inokucaca okuhle kanye nokumelana ne-UV, okuyenza ibe yisinqumo esihle sokukhiqiza izingxenye ezisobala nezinhlelo zokusebenza zangaphandle.I-PETG Filament ingasetshenziswa ngemibala ehlukahlukene ehlukene futhi ingaxutshwa nezinye izinto eziningi zokuphrinta ze-3D.
Intambo yokuphrinta ye-3d, i-PETG filament, i-PETG filament China, i-PETG filament abahlinzeki, abakhiqizi be-PETG filament, intengo ephansi ye-PETG filament, i-PETG filament esitokisini, isampula yamahhala ye-PETG, i-PETG filament eyenziwe e-China, i-3D filament PETG, i-PETG 1.75mm filament.
| I-Extruder Temperature (℃) | 230 - 250℃Kunconyiwe 240℃ |
| Izinga lokushisa lombhede(℃) | 70 – 80°C |
| Nozzle Usayizi | ≥0.4mm |
| Isivinini saphephela | PHANSI ngekhwalithi engcono yendawo / VALIWE ukuze uthole amandla angcono |
| Isivinini Sokuphrinta | 40 – 100mm/s |
| Umbhede Oshisayo | Kudingeka |
| Indawo Enconyiwe Yokwakha | Ingilazi eneglue, Masking paper, Blue Tape, BuilTak, PEI |
I-Torwell PETG Filament iyinto elula ukuyiphrinta, enephuzu lokuncibilika ngokuvamile phakathi kuka-230-250.℃.Uma kuqhathaniswa namanye ama-polymers we-thermoplastic, i-PETG inefasitela elibanzi lokushisa ngesikhathi sokucubungula, elivumela ukuthi liphrintwe ngaphakathi kwebanga lokushisa elibanzi futhi linokuhambisana okuhle namaphrinta ahlukene we-3D.
